ONDINE LONDONPlan your kitchen ↗
ARCHITECTURE · INTERIORS · BESPOKE JOINERY

A considered kitchen.
A clearer investment.

Begin with the space you have and the materials you love. Explore an indicative budget for cabinetry, worktops and installation — a thoughtful first step towards your kitchen.

Explore your kitchen investment ↓
London & beyond · Made personal, from the first conversation

01 Measure your cabinetry runs

02 Choose units & materials

03 Reveal your budget breakdown

01 / YOUR SPACE

Start with the proportions.

Measure along the cabinetry, rather than the perimeter of the room. Include island cabinetry in your base run. Wall cupboards are measured separately.

Quick estimate assumes 600mm modules: one undermounted sink base unit, two drawer units and one dishwasher frontage, with the remaining run as base cupboards. Length rounds to the nearest module. Accessories and sink cut-outs are excluded from the quick estimate; switch to individual-unit mode to add them.

Cabinet finish

Choose the character of your cabinetry.

Finish selection is included in your enquiry and estimate. Current provisional unit prices apply to all four finishes; any finish-specific adjustment will be confirmed in your tailored quotation. Timber swatches are illustrative.

0 items selected

Use the quantity field or plus/minus controls to build your kitchen. Changing a quantity switches you to individual-unit pricing.

Base & wall cabinetry

Standard base cupboard — 600 × 600mm

£1,000 / unit

Standard wall cupboard — 600 × 600mm

£750 / unit

600mm wide × 600mm high; 350mm nominal depth. Confirm depth in your design.

3-drawer base unit — 600 × 600mm

£1,600 / unit

Base cupboard — 900 × 600mm

£1,450 / unit

3-drawer base unit — 900 × 600mm

£1,950 / unit

Sink cabinetry

Undermounted sink base unit — 600 × 600mm

£1,200 / unit

Cabinet only; sink and tap are in your fittings allowance.

Undermounted sink base unit — 800 × 600mm

£1,400 / unit

Cabinet only; sink and tap are in your fittings allowance.

Undermounted sink base unit — 900 × 600mm

£1,500 / unit

Cabinet only; sink and tap are in your fittings allowance.

Pull-outs & corner storage

Corner carousel unit — 900 × 600mm

£2,100 / unit

Nominal frontage; corner footprint depends on layout.

Internal pull-out drawers inside a cupboard — 300 × 600mm

£1,200 / unit

Complete cupboard with internal pull-out drawers.

Internal pull-out drawers inside a cupboard — 600 × 600mm

£1,750 / unit

Complete cupboard with internal pull-out drawers.

Appliance frontages

Dishwasher frontage — 600mm

£450 / unit

Door and fitting allowance; appliance excluded.

Washing machine frontage — 600mm

£450 / unit

Door and fitting allowance; appliance excluded.

Belfast sink cabinets

595mm sink widthBELFAST600mm cabinet depth

Belfast sink cabinet — 595mm sink

£1,400 / unit

For a 595mm rectangular Belfast sink; 600mm cabinet depth. Approximate 600mm cabinet width, subject to sink fit and support details. Cabinet and sink support only; ceramic sink and tap are in your fittings allowance.

795mm sink widthBELFAST600mm cabinet depth

Belfast sink cabinet — 795mm sink

£1,600 / unit

For a 795mm rectangular Belfast sink; 600mm cabinet depth. Approximate 800mm cabinet width, subject to sink fit and support details. Cabinet and sink support only; ceramic sink and tap are in your fittings allowance.

Bespoke double sinkDOUBLE BELFAST600mm cabinet depth · POA

Bespoke double Belfast sink cabinet — POA

POA — price on application / unit

Price on application. Bespoke cabinet and support for a double Belfast sink, 600mm cabinet depth; sink and cabinet widths to be agreed. This item, its finishing and installation are excluded from the numeric estimate pending a quotation. Sink and tap remain in your fittings allowance.

Internal accessories

Internal timber cutlery tray — for 600mm drawer

£300 / accessory

Add-on only; select a compatible drawer cabinet separately.

Internal timber cutlery tray — for 900mm drawer

£400 / accessory

Add-on only; select a compatible drawer cabinet separately.

Under-sink pull-out drawer — for 600mm unit

£450 / accessory

Internal add-on only. Select one matching sink cabinet; subject to waste, trap and sink clearance.

Under-sink pull-out drawer — for 700mm unit

£500 / accessory

Internal add-on only. Select one matching sink cabinet; subject to waste, trap and sink clearance.

Under-sink pull-out drawer — for 800mm unit

£550 / accessory

Internal add-on only. Select one matching sink cabinet; subject to waste, trap and sink clearance.

Under-sink pull-out drawer — for 900mm unit

£600 / accessory

Internal add-on only. Select one matching sink cabinet; subject to waste, trap and sink clearance.

Worktop cut-outs

Drainer grooves600mm nominal cut-out

Sink cut-out with drainer grooves — 600mm nominal

£450 / cut-out

One polished undermount sink aperture with five drainer grooves alongside. Provisional £450 including VAT, in addition to the worktop allowance. Tap holes excluded. Exact aperture and groove layout follow the sink template and selected stone.

MixerTap holeTap holeNo grooves600mm nominal cut-out

Sink cut-out with three tap holes — 600mm nominal

£400 / cut-out

One polished undermount sink aperture plus two outer tap holes and one central mixer hole; no drainer grooves. Provisional £400 including VAT, in addition to the worktop allowance. Hole sizes and positions follow the chosen fittings; sink and taps excluded.

Coffee stations

Shelf 1Microwave shelfLEDLED2120mm high900mm wide · 600mm deep

Open coffee station — 900 × 600 × 2120mm

£3,800 / unit

Two open upper shelves, including microwave space; three base pull-out drawers; full-height side panels; LED strips beneath both shelves with driver. Cabinetry and LED allowance included. Worktop automatically costed separately in your chosen material. Microwave and electrical connection excluded.

Shelf 1Microwave shelfLEDLED2120mm high900mm wide · 600mm deep

Pocket-door coffee station — 900 × 600 × 2120mm

£5,400 / unit

As the open station, with upper pocket doors closing down to the worktop and retracting into the sides. Three base drawers remain below. Includes pocket-door hardware, full-height panels and two LED strips with driver. Worktop automatically costed separately. Microwave and electrical connection excluded.

Tall fridge housings

2120mm high900mm nominal · 600mm deep

Timber fronts conceal a compatible appliance

Timber-fronted American fridge housing — 900 × 600 × 2120mm nominal

£3,200 / unit

Full-height sides, top enclosure and concealing timber fronts in your selected finish. Appliance excluded. Requires an appliance explicitly suitable for furniture fronts; do not attach doors to an unsuitable freestanding fridge. The 900mm width and 600mm depth are nominal planning dimensions; final housing must allow the selected appliance width, panel thickness, door operation and manufacturer ventilation clearances.

2120mm high900mm nominal · 600mm deep

Stainless-steel appliance remains visible

Open American fridge housing — 900 × 600 × 2120mm nominal

£1,800 / unit

Full-height side panels and top enclosure; stainless-steel American-style appliance stays visible. Appliance excluded. The 900mm width and 600mm depth are nominal planning dimensions, not a guaranteed fit: allow appliance dimensions, panel thickness, handles, door swing and manufacturer ventilation clearances before ordering.

FridgeFreezer2120mm high600mm nominal · 600mm deep

Integrated fridge-freezer frontage

Integrated fridge-freezer housing — 600 × 600 × 2120mm nominal

£2,100 / unit

Tall cabinet with separate fridge and freezer fronts in your chosen finish, side panels and top enclosure. Appliance excluded. Intended for a compatible integrated model; check actual niche dimensions, door split, hinge system and manufacturer ventilation specification. 600mm is the nominal cabinet width and depth, not the internal appliance space.

Pantry

Tall cereal storageLEDAny size · Price on application

Bespoke pocket-door pantry — any size, POA

POA — price on application / unit

Any size — price on application. Pocket doors close the upper storage away, with additional shelves, tall cereal-box storage above a worktop, three base drawers and LED task lighting. No microwave. Diagram is illustrative; dimensions, shelf spacing and finish are tailored to your brief. The pantry, worktop, hardware and installation are quoted separately and excluded from the numeric estimate.

All displayed rates include VAT. These are provisional Ondine budgeting allowances, not published Ondine quotations or competitor prices.

02 / YOUR SURFACES

Choose the material that feels right.

Area = run length × depth + island length × depth + 0.54m² per coffee station. Coffee-station worktops are added automatically; exclude them from the worktop run above. Measure L-shaped sections without counting the corner twice. Allowances include standard fabrication and worktop fitting; sink cut-outs are added separately in individual-unit mode. Premium slabs, other special cut-outs, splashbacks and waterfall ends need a separate quote.

KITCHEN HARDWARE

The finishing touch.

A carefully selected collection of beautiful kitchen hardware can be supplied by our partners at Studio/ORE, Corston and other bespoke handmade makers. Explore five styles from Corston’s furniture hardware range below.

Original, simplified diagrams based on the named Corston styles; not technical drawings or to scale. Confirm exact dimensions, finishes and fixing details using the linked product specifications. Hardware prices are confirmed in your quotation and reconciled against the existing handles allowance.

03 / THE FINISHING DETAILS

Allow for the whole kitchen.

Panels, plinths and handles: 12% of other cabinetry; coffee-station and tall-fridge housing panels and hardware are included in their unit allowances. Cabinet installation: 18% of cabinetry, minimum £1,800. These are adjustable planning assumptions, not fixed service fees. Plumbing, electrics, flooring, decoration, structural work and design fees are excluded.

YOUR PERSONAL ESTIMATE

Make room for
the possibilities.

Share your name and email to reveal your estimate here. Your details and kitchen selections will be saved with this enquiry.

We use your details to record and respond to your kitchen enquiry, not to subscribe you to marketing. No email is sent automatically. How we use your information

ONDINE KITCHENS

Choose your kitchen.
Make it work for you.

Our kitchen fabrication service brings together a choice of set kitchen ranges, cabinet sizes and finishes. We help you select the right combination for your space, from the layout of your cupboards and drawers to the worktop and internal fittings, before preparing a clear, itemised quotation.

01 / YOUR APPOINTMENT

Plan your kitchen with us.

An appointment gives us time to look through your measurements, discuss the kitchen range you prefer and work through the units you need. We consider storage, appliances, sink positions and worktops so you can see how the choices fit together.

Appointments can be arranged in person or remotely, subject to availability. We confirm the format, any appointment fee and what is included when you book.

02 / YOUR PLANS & QUOTATION

See the details clearly.

Following the appointment, we prepare the proposed cabinet layout and an itemised quotation for the agreed supply. This sets out your chosen units, finishes and accessories, together with any worktops or additional services included in the order.

You can review the proposal and agree any changes before confirming your kitchen.

03 / CONFIRMING YOUR ORDER

Ready for fabrication.

Before manufacture, the dimensions, cabinet selection, finishes and appliance requirements need to be checked and approved. We then confirm the production and delivery arrangements for your order.

Our service centres on kitchen fabrication and supply. Site preparation, installation and building works should be arranged separately unless expressly included in your quotation.

04 / PLANNING YOUR TIMING

Get in touch early.

As a planning guide, contact us around six months before you would like your kitchen installed. This gives you time to choose your range, refine the layout and coordinate the order with your installer or builder.

If you have a shorter timeframe, let us know. We will discuss availability and confirm the manufacturing lead time for your order. If the kitchen depends on planning permission or building work, tell us how these are progressing.

Arrange a kitchen appointment

Tell us a little about your project and your preferred dates. We will discuss the next steps and arrange an appointment to help you choose and specify your kitchen.

Enquire about a kitchen appointment ↗

What to share with us

  • Your project location and preferred installation date
  • A measured plan, or approximate room dimensions to begin with
  • Photographs of the room and any relevant building plans
  • Your preferred kitchen range and cabinet finish
  • Your appliance sizes and sink and worktop preferences
  • Your budget and the status of any building work

If you are still deciding, share what you have — we can explain what information is needed to progress your order.

Your information

Ondine London is the intended recipient of your kitchen enquiry. We store your name, email, selections and estimate to handle that enquiry. This private review calculator has no newsletter subscription or automatic email service. Contact Ondine through ondine.london to ask about your stored information or request its removal. The studio’s retention period and full privacy notice must be confirmed before a public launch.